Snowblower Forum : Snow Blower Forums - View Single Post - HSS-928 sediment cup o-ring
View Single Post
post #6 of Old 01-11-2017, 03:29 AM
JayzAuto1
Member
 
Join Date: Jul 2016
Location: Walpole MA
Posts: 59
Post Thanks / Like
Thanks (Given):
Thanks (Received):
Likes (Given):
Likes (Received):
GMorning Tom, You should be fine re-using that O-Ring, as it sits in a recessed groove in the carb body and is well protected. I would probably use a small amount of vaseline on the flange, to be used as a lubricant. Most manufactures recommend replacing gaskets and O-Rings upon removal. It's safer and may be a liability factor. But it's brand new....I wouldn't sweat that one. GLuck, J
JayzAuto1 is online now  
 
 
For the best viewing experience please update your browser to Google Chrome