Snowblower Forum : Snow Blower Forums - View Single Post - Gravel driveway ; use a pipe?
View Single Post
post #3 of Old 03-24-2018, 09:44 PM Thread Starter
Senior Member
Join Date: Feb 2018
Posts: 259
Post Thanks / Like
Thanks (Given):
Thanks (Received):
Likes (Given):
Likes (Received):
The pipe was cut from end to end on a old mill the slot was the thickness of the thickness of the bolt on blade of the plow, with the plow raised all you had to do was hold the slot to the plow bottom and tap it on to the blade,they even got fancy and started welding the brackets in place for both western and meyers that let you use the bolt for the plow blade. It went over grass like butter and it would not scalp gravel and sand from the drive way. Here in Mich. in the country paved and concrete drives are few and far between so this was a very good fit for the area. But no it did not act like a bulldozer, the rounded bottom let it ride up over the stones and gravel.
Lottstodo is offline  
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
Likes classiccat liked this post
For the best viewing experience please update your browser to Google Chrome