Snowblower Forum : Snow Blower Forums - View Single Post - wheels won't turn
View Single Post
post #4 of Old 10-30-2011, 09:32 PM
fronos4
Member
 
Join Date: Jan 2011
Posts: 82
Post Thanks / Like
Thanks (Given):
Thanks (Received):
Likes (Given):
Likes (Received):
A quick test you can try is with the engine off, engage the drive and push or pull the machine. If you can move it with little effort, the drive disc isn't engaging onto the friction wheel which would most likely require you to check the underside and as td5771 mentioned it could just be the drive disc is hung up. I had an issue on my previous MTD where the drive would engage but couldn't move the forward/reverse lever, come to find out the grease on the shaft the friction wheel slid on dried up and no longer offered any lubrication and rusted, had to tap it loose, clean it up and re-grease the shaft.
fronos4 is offline  
 
 
For the best viewing experience please update your browser to Google Chrome