Ariens 926DLE all cleaned up and ready to go - Snowblower Forum : Snow Blower Forums
 
LinkBack Thread Tools
post #1 of 10 Old 08-31-2017, 09:01 PM Thread Starter
Senior Member
 
Join Date: Nov 2016
Location: Massachusetts
Posts: 1,631
Post Thanks / Like
Thanks (Given): 12
Thanks (Received): 110
Likes (Given): 112
Likes (Received): 254
Ariens 926DLE all cleaned up and ready to go

I went through the Ariens I got one heck of a deal, This thing is in superb condition and starts first pull very easily and runs great, Differential works great, Debated keeping it but kind of need the money and my 1027 runs great and does the job well. Will list it a little high just to see if there are any bites but anyway here it is. Model #is 924124







Sno-Tek Modded, 15"X-Track tires (Now has same X-Track tires but 13"x4" for better fit), 254cc engine LED light and hand warmers.
Snapper 6/22 sold but not forgotten. Was my first.
Ariens ST1027LE workhorse and going strong.
New 2017 Ariens Deluxe completely rebuilt after losing a fight with a forklift.

Last edited by Dauntae; 09-01-2017 at 12:12 AM.
Dauntae is online now  
Sponsored Links
Advertisement
 
post #2 of 10 Old 09-01-2017, 08:09 AM
Senior Member
 
tdipaul's Avatar
 
Join Date: Jul 2015
Location: Central NJ
Posts: 832
Post Thanks / Like
Thanks (Given): 73
Thanks (Received): 73
Likes (Given): 248
Likes (Received): 290
nice clean machine

1989 John Deere 1032
1979 Toro 5/24 38040 (now a 6.5/24)
2015 Snapper Pro SW30 52" Mower
tdipaul is offline  
post #3 of 10 Old 09-01-2017, 02:54 PM
Senior Member
 
Join Date: Jun 2014
Location: Shoreline, CT
Posts: 3,446
Post Thanks / Like
Thanks (Given): 103
Thanks (Received): 375
Likes (Given): 466
Likes (Received): 477
Very nice and clean machine.
I see it is a 924 series as some members suspected it to be.
You should have no problems selling it.... good luck
YSHSfan is offline  
post #4 of 10 Old 09-01-2017, 03:10 PM Thread Starter
Senior Member
 
Join Date: Nov 2016
Location: Massachusetts
Posts: 1,631
Post Thanks / Like
Thanks (Given): 12
Thanks (Received): 110
Likes (Given): 112
Likes (Received): 254
Posted it for $700 just to see if any bites, So far 2 $500 offers and I replied wanting $600 and one is talking to here husband, Really debating on keeping it though LOL Although I DID just get the auto turn kit for my 1027LE but this one is much heavier duty.

Sno-Tek Modded, 15"X-Track tires (Now has same X-Track tires but 13"x4" for better fit), 254cc engine LED light and hand warmers.
Snapper 6/22 sold but not forgotten. Was my first.
Ariens ST1027LE workhorse and going strong.
New 2017 Ariens Deluxe completely rebuilt after losing a fight with a forklift.
Dauntae is online now  
post #5 of 10 Old 09-01-2017, 05:40 PM
Senior Member
 
Join Date: Jun 2014
Location: Shoreline, CT
Posts: 3,446
Post Thanks / Like
Thanks (Given): 103
Thanks (Received): 375
Likes (Given): 466
Likes (Received): 477
Stay firm at $700 then (except if any of the counter-offer of $600 accepts). If you get $700 be happy about it (there will always be another one).
Or sell the 1027 and keep the 926.
YSHSfan is offline  
post #6 of 10 Old 09-01-2017, 06:20 PM
Banned
 
Join Date: Sep 2010
Location: Michigan
Posts: 1,585
Post Thanks / Like
Thanks (Given): 3
Thanks (Received): 158
Likes (Given): 95
Likes (Received): 302
Dau

Last edited by jtclays; 03-13-2018 at 04:07 PM.
jtclays is offline  
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
Likes YSHSfan liked this post
post #7 of 10 Old 09-01-2017, 09:30 PM Thread Starter
Senior Member
 
Join Date: Nov 2016
Location: Massachusetts
Posts: 1,631
Post Thanks / Like
Thanks (Given): 12
Thanks (Received): 110
Likes (Given): 112
Likes (Received): 254
Well Got the $600 counter offer if I can wait a week so it will sit until next week, For holding it he said his old one is in great shape except the engine froze up, A double pulley Tec. He thinks it a 28" or bigger White something or other is his words LOL but I have a twin pulley 10 HP sitting here so that will make me some more with his old one, Just hope it's in as good shape as he says. He said he will give it to me just for holding this until next week.

Sno-Tek Modded, 15"X-Track tires (Now has same X-Track tires but 13"x4" for better fit), 254cc engine LED light and hand warmers.
Snapper 6/22 sold but not forgotten. Was my first.
Ariens ST1027LE workhorse and going strong.
New 2017 Ariens Deluxe completely rebuilt after losing a fight with a forklift.
Dauntae is online now  
post #8 of 10 Old 09-01-2017, 09:46 PM
Junior Member
 
tinboat's Avatar
 
Join Date: Aug 2017
Location: NJ
Posts: 16
Post Thanks / Like
Thanks (Given): 2
Thanks (Received): 0
Likes (Given): 0
Likes (Received): 0
That's a beautiful machine you have there, looks like new!
tinboat is offline  
post #9 of 10 Old 09-02-2017, 12:39 PM
Senior Member
 
Join Date: Jan 2016
Location: Lakeville Ma
Posts: 1,748
Post Thanks / Like
Thanks (Given): 70
Thanks (Received): 168
Likes (Given): 63
Likes (Received): 580
nice machine Dauntae! I wish we could keep them all.........
cranman is online now  
post #10 of 10 Old 09-17-2017, 10:26 PM Thread Starter
Senior Member
 
Join Date: Nov 2016
Location: Massachusetts
Posts: 1,631
Post Thanks / Like
Thanks (Given): 12
Thanks (Received): 110
Likes (Given): 112
Likes (Received): 254
Well it was delivered and the old one taken home, Just got a chance to go through it some and got it running, Seems the auger belt was binding up and not allowing the pull starter to turn it over, I pulled off the starter first and used a socket and breaker bar to see if it moved with some croil in the cylinder just to make sure it was lubed up as it had been sitting for a while but once I adjusted the belt the crank was turning pretty well so I put the starter cord back on and a little starter fluid in the plug hole with a new plug, Pulled and it fired right up and ran strong and rather runs well too. It's a white SB750 24" with a Tec 7hp and rather good shape too. Will go through it more but started first pull today just to see if it would start again. Will get a few pics and the only part needed was a piece on the handle to adjust the chute up and down. Even the headlight is bright and not all fogged up. So to sum up the luck I have had so far on this is traded a Toro 521 that I originally got for $50 although I did have to drive a little better than a hour into NH to get but just a carb clean and a little touch up paint and it was a good running machine for the Ariens that I sold for $600 and got this in trade with the $600 and this is starting easy and only needed a $10 part and will be completely working in good shape and hoping to get $250 for it (Yes it's in that good of shape) So I turned a $50 machine into $850 cash if I get my asking price. May list it for $300 now but thinking I may hold onto it if no takers at that price and wait for the snow and get my asking price. Will get some pics and start a new thread tomorrow.
Quick vid after I just got it running.

Sno-Tek Modded, 15"X-Track tires (Now has same X-Track tires but 13"x4" for better fit), 254cc engine LED light and hand warmers.
Snapper 6/22 sold but not forgotten. Was my first.
Ariens ST1027LE workhorse and going strong.
New 2017 Ariens Deluxe completely rebuilt after losing a fight with a forklift.

Last edited by Dauntae; 09-17-2017 at 10:31 PM.
Dauntae is online now  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Snowblower Forum : Snow Blower Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome