Hey guys on my 828d the chute deflector control lever moves deflector all the way down as it should but when going forward to move deflector up about 2/3 to 3/4 of the way up the lever the deflector quits moving up and I push a good 1/2 to 3/4" of slack into the cable. Deflector is still 10-15° short of being all the way up.

Is this normal on these machines? If not is there an acruel cable adjustment somewhere or how do I adjust things so I get a true full range of deflector movement. I feel like if the lever has movement and cable is slacking I should still be getting movement.

Let me know.

Thanks.

So ours are different bit similar. The only adjustment is on the back of the control panel. Other then that the spring attachment on the chute it's self

Sent from my SM-N900P using Tapatalk

Does yours go all the way up or stop just short and push slack into your cable.

The new one goes all the way up. The older one w the weak spring will go up 7/8 then goes loose

Sent from my SM-N900P using Tapatalk

You can see it in this pic


Sent from my SM-N900P using Tapatalk

I have a couple videos uploading that I'll post explaining exactly what mines doing. May not get them on till tomorrow though.

Wouldn't you know. We got 6" tonight and both deflectors are acting up now....

Sent from my SM-N900P using Tapatalk