Snowblower Forum : Snow Blower Forums - View Profile: tabora

tabora tabora is offline

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 3 of 3
  1. Jarsh
    02-27-2018 10:50 PM - permalink
    Jarsh
    Disassembled everything. Eyeballing both jets side by side with a magnifying glass, they both appear to be the same length. I'm stumped! I'll try to source a washer or an o-ring and give it a shot. Nothing to loose at this point.

    Definitely require a good small slot screwdriver. The one I have is getting me through a pinch but find it's a little on the small size and have to be very careful with it. I'll try and get a good set of peepers to look at the jet to make sure there's no damage. From what little I can see it's fine.

    At this point it makes me wonder whether or not the tube that holds the nozzle and jet are different lengths for both carbs. The Predator 212 is closer to the GX200 though the 200 and 160 are mostly the same. Baffled to say the least.

    Jarrod
  2. Jarsh
    02-27-2018 09:41 PM - permalink
    Jarsh
    Andy, in the event there is a difference in length between the two, are there certain materials I should either use or avoid, as a spacer, when used with fuel?

    I didn't want to question John on his work. I just assumed both jets are the same length. Looking at them both I could have sworn his jet was factory. Very clean and look identical to me.

    Being it isn't closing off, this is definitely something to look for with a simple solution. I have the munchies being I've had little to eat today. Curiosity is getting to me. Gonna grab something to eat and go tear into it tonight. I'll let you know my findings.
  3. tonysak
    01-08-2018 08:57 AM - permalink
    tonysak
    Hi Andy,

    I was just answering another PM and saw your old one and I couldn't remember how we left off. Did you end up getting one of these? I only have 4 left for the 32" HSS.

  About Me

  • About tabora
    Biography
    Grew up in Maine, alum of Williams College in NW Mass, now live 1 mile from my childhood home.
    Location
    Cape Elizabeth, Maine
    Interests
    '17 HSS1332ATD, '87 HS80K1-TAS, '83 HR214SXA, '90 TransAlp, '88 NX250, '88 NX125, '81 NX50, '77 CT90
    Occupation
    Semi-retired former CIO of Konica Photo Imaging. Now a Digital Imaging & I.T. Consultant

  Statistics

Total Posts
Albums
Visitor Messages
General Information
  • Last Activity: 10-16-2019 08:30 PM
  • Join Date: 03-01-2017
  • Referrals: 0

  Post Thanks / Like

10-16-2019
03:01 PM - orangputeh clicked Likes for this post: HS80 light... Can I add a stator? by tabora
10-15-2019
12:07 AM - Aviator clicked Likes for this post: HS1132 carburator rebuild by tabora
12:07 AM - Aviator clicked Thanks for this post: HS1132 carburator rebuild by tabora
10-13-2019
10:16 PM - orangputeh clicked Likes for this post: Flex Seal Tape by tabora
11:59 AM - Aviator clicked Likes for this post: Modified chute by tabora
10-11-2019
11:24 PM - SkunkyLawnmowers clicked Likes for this post: Honda HS828 by tabora
09:45 PM - hatesnow clicked Likes for this post: Honda Generic GX Engine Shop Manuals GX120 through GX390 by tabora
09:45 PM - hatesnow clicked Thanks for this post: Honda Generic GX Engine Shop Manuals GX120 through GX390 by tabora
07:27 AM - jblkiller clicked Likes for this post: Upgrading your snowblower lights to LED lights by tabora
07:26 AM - jblkiller clicked Thanks for this post: Upgrading your snowblower lights to LED lights by tabora
10-10-2019
12:32 PM - gibbs296 clicked Likes for this post: Looking for a new blower by tabora
05:42 AM - micah68kj clicked Likes for this post: IN need of Briggs Intek Gas Tank by tabora
05:42 AM - micah68kj clicked Thanks for this post: IN need of Briggs Intek Gas Tank by tabora
10-09-2019
06:43 PM - dajoip clicked Thanks for this post: Honda HS828 by tabora
06:20 PM - tabora clicked Likes for this post: Honda HS828 by cpchriste
01:31 PM - tabora clicked Likes for this post: Auger scraper bar by SkunkyLawnmowers
10-08-2019
07:04 PM - SkunkyLawnmowers clicked Thanks for this post: Honda HSS724AW Which Fumoto Valve? by tabora
07:03 PM - micah68kj clicked Likes for this post: The nerve of some people! by tabora
10-04-2019
08:52 AM - orangputeh clicked Likes for this post: HS50 Auger pulley by tabora
10-02-2019
09:11 PM - tabora clicked Likes for this post: Briggs/Murray 1227MD Auger Worm Gear Replacement by oneacer

  Mentions

10-09-2019
01:10 PM - tabora mentioned jrom in post HAS1332ACTD warranty work, TSB's
...el than I am. See @jrom's post here, for exa...
04-24-2019
07:35 PM - orangputeh mentioned tabora in post Honda (HS55) labels/stickers/decals to buy?
...re much cheaper as tabora mentioned. I use a ...
04-22-2019
03:54 PM - tabora mentioned orangputeh in post Auger issue
...e culprit. I think orangputeh is correct and the c...
08:03 AM - orangputeh mentioned tabora in post Auger issue
...tackle this job. tabora. what do you think i...
01:09 AM - tabora mentioned orangputeh in post Auger issue
...peller bearing. As orangputeh said, it's an easy j...
04-14-2019
03:17 PM - tabora mentioned orangputeh in post Honda paint
...or older models per orangputeh https://www.walmart...
03-19-2019
01:13 PM - orangputeh mentioned tabora in post HSS928CT (Canadian model)
...eated-grips.html tabora ....+4. you are o...
03-11-2019
09:43 PM - tabora mentioned blue dragon in post Hss articulating chute
...s in the inquiry by blue dragon.
03-06-2019
04:35 PM - tabora mentioned CTHuskyinMA in post Skid shoes - Metal vs. Synthetic
...6003. Go with what CTHuskyinMA says! See new part ...
03-05-2019
02:41 PM - tabora mentioned vmax29 in post Heated hand grips and LED light
...n on the inside as vmax29 did. I couldn't get...
02-20-2019
11:24 PM - ryanhatfield mentioned tabora in post Converting Ariens 924 series to Electric
...ghly 30Ah battery. tabora You're correct, it i...
11:23 PM - ryanhatfield mentioned tabora in post Deleted Posts
07:01 PM - orangputeh mentioned tabora in post Left track no longer engaging.
...lved going on... tabora how can i download t...
02:52 PM - ryanhatfield mentioned tabora in post Deleted Posts
01-13-2019
04:25 PM - tadawson mentioned tabora in post Pop ups and url redirects???
...our phone. On, and tabora, AdblockPlus is just...
12-31-2018
01:52 PM - orangputeh mentioned tabora in post Honda Auger Housings/Buckets Conversions
...re ( I think it was tabora ? ) asked about usin...
01:23 PM - orangputeh mentioned tabora in post Honda Auger Housings/Buckets Conversions
...re ( I think it was tabora ? ) asked about usin...
12-25-2018
06:17 PM - tabora mentioned Aviator in post Re-jetting
...A Sea Level Per @Aviator: ...
11-17-2018
01:56 AM - CalgaryPT mentioned tabora in post I would avoid the new chute design
tabora - There's a good ide...
10-13-2018
08:11 PM - orangputeh mentioned tabora in post 2018 Honda Model Comparisons
...ybe i'm wrong. oh, tabora post beat me to it.

  Quotes

10-15-2019
10:04 PM - tabora quoted JayzAuto1 in post Oil leaking
Most likely the valve would op...
10-11-2019
04:32 PM - tabora quoted SkunkyLawnmowers in post Honda HS828
Personally, I'd love to see V twin en...
08:20 AM - jblkiller quoted tabora in post Upgrading your snowblower lights to LED lights
I installed a set of those ...
10-10-2019
10:17 PM - tabora quoted jblkiller in post Upgrading your snowblower lights to LED lights
How to know the capacity of wa...
05:42 AM - micah68kj quoted tabora in post IN need of Briggs Intek Gas Tank
$39.99 delivered (no cap): ...
10-09-2019
08:18 PM - tabora quoted Bill Byng in post Craftsman owners manual
Found this manual on www.parts...
02:08 PM - tabora quoted SkunkyLawnmowers in post Honda HSS724AW Which Fumoto Valve?
Interesting, because when I was compa...
01:15 PM - SkunkyLawnmowers quoted tabora in post Honda HSS724AW Which Fumoto Valve?
Actually, the GX390 uses 90...
01:10 PM - tabora quoted btm in post HAS1332ACTD warranty work, TSB's
So I am between 200-300f...
12:58 PM - tabora quoted SkunkyLawnmowers in post Honda HSS724AW Which Fumoto Valve?
What I don't understand - I'm probabl...
09:57 AM - SkunkyLawnmowers quoted tabora in post Honda HSS724AW Which Fumoto Valve?
... that reason. Hi tabora Thanks for your i...
10-08-2019
06:58 PM - tabora quoted oneacer in post Troybilt Artic Storm 34 oil capacity
I am sure that the oil capac...
12:42 PM - tabora quoted Phaethar in post Looking for a new blower
I like the price range and fe...
10-04-2019
12:17 PM - tabora quoted rcleone in post Buying snowjoe
Thinking of buying a SnowJoe...
10-03-2019
09:33 PM - tabora quoted Cschro in post HS50 Auger pulley
The model is 1017182 or 32 ...
08:24 PM - tabora quoted eliascm in post Shear Pin problems on Cub Cadet 3x?
The link you gave for the sh...
10-02-2019
09:11 PM - tabora quoted oneacer in post Briggs/Murray 1227MD Auger Worm Gear Replacement
Have you checked with Flip M...
08:47 PM - tabora quoted cwolcott in post Steering Control
I understand they're sealed a...
10-01-2019
11:59 AM - tabora quoted ST1100A in post Some general questions on the HSS1332
Most of the guys on here tal...
09-20-2019
11:53 PM - ST1100A quoted tabora in post New updated Honda snowblowers?
Are you just making this al...
 
For the best viewing experience please update your browser to Google Chrome