Snowblower Forum : Snow Blower Forums - View Profile: Town

Town Town is online now

Senior Member

  Visitor Messages

Showing Visitor Messages 1 to 3 of 3
  1. legarem
    03-25-2019 03:12 PM - permalink
    legarem
    Thanks a lot


    When I look inside the chute hole I was always worried by the position of the impeller that was not fitting correctly with the chute hole so i'm happy you mentionned me that the 6 blades has a more forward position. As my new snowblower is a 2017, I shouldn't have problems to fit the 6 blades fan. I've done that earlier on other older machines. I learned at that time it was best to buy the special punch required to do the job.


    Thanks


    Marc
  2. legarem
    03-24-2019 08:03 PM - permalink
    legarem
    Hello


    I just acquired a Platinum 20 SHO 2017 for only $1200 to replace my 926LE super modified. I wanted autoturn and I am tired with carb icing with the Honda GX390 engine. My new toy is really easy to maneuver. I will possibly only change the impeller for a 6 blades. I found the best price here: https://www.ebay.ca/itm/Genuine-OEM-...sAAOSwZ5tbaI88


    Will it fit on my Platinum ? I think you have the same snowblower as mine but I am not sure
    Thanks
    Marc
  3. Winter
    01-01-2016 10:42 PM - permalink
    Winter
    It is the Drive belt problem.The fix is to reduce the amount of movement on the drive plate pulley ,how do you do it the fix?

  About Me

  • About Town
    Location
    Ottawa, Ontario, Canada
    Occupation
    Retired
  • Signature
    2015 Ariens Platinum 30 SHO - model 921040

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Yesterday 06:29 PM
  • Join Date: 01-31-2015
  • Referrals: 0

  Post Thanks / Like

12-11-2019
11:22 AM - Waylon clicked Thanks for this post: Hard to Start Honda Four Stroke by Town
12-10-2019
05:53 PM - Grunt clicked Likes for this post: Hard to Start Honda Four Stroke by Town
04:47 PM - ST1100A clicked Thanks for this post: Hard to Start Honda Four Stroke by Town
03:08 PM - Waylon clicked Thanks for this post: Hard to Start Honda Four Stroke by Town
12-08-2019
07:03 PM - e.fisher26 clicked Likes for this post: Flywheel magnet came off by Town
05:34 PM - Town clicked Likes for this post: Modified chute by all3939
02:19 PM - Town clicked Thanks for this post: Modified chute by tabora
01:36 PM - Town clicked Likes for this post: Modified chute by tabora
12-07-2019
04:58 PM - Town clicked Likes for this post: EFI Problems by oneacer
04:57 PM - Town clicked Likes for this post: EFI Problems by tadawson
11:53 AM - Zavie clicked Likes for this post: EFI Problems by Town
09:46 AM - Town clicked Likes for this post: 00 grease by Kiss4aFrog
12-04-2019
12:37 PM - Rooskie clicked Likes for this post: YouTuber's video of "junk" Ariens still up by Town
12-01-2019
07:03 PM - Town clicked Likes for this post: Oil leak question by 87powershiftx2
06:59 PM - Town clicked Likes for this post: Grease zerk pulled out of auger shaft while lubing. by notabiker
07:55 AM - penna stogey clicked Likes for this post: Snowblower Oil change.. SYN or Reg? Blend? by Town
11-29-2019
12:40 PM - Town clicked Likes for this post: Tire question .... by cranman
12:39 PM - Town clicked Likes for this post: Tire question .... by TireguyfromMA
09:33 AM - Sgthawker clicked Likes for this post: Grease zerk pulled out of auger shaft while lubing. by Town
09:33 AM - Sgthawker clicked Thanks for this post: Grease zerk pulled out of auger shaft while lubing. by Town

  Garage

    2015 Ariens Platinum 30 SHO
    Machine

  Mentions

12-08-2019
06:46 PM - Town mentioned tabora in post Modified chute
...seen in post #27 by tabora as the lower left pi...
06:46 PM - Town mentioned drmerdp in post Modified chute
...r as exemplified by drmerdp for his chute design...
02:19 PM - Town mentioned drmerdp in post Modified chute
...rs have done - see @drmerdp's mod at bottom belo...
12-07-2019
10:22 AM - Town mentioned Jackmels in post EFI Problems
Jackmels I don't understa...
12-01-2019
06:59 PM - Town mentioned notabiker in post Grease zerk pulled out of auger shaft while lubing.
notabiker yes that is the long...
11-29-2019
12:51 PM - SimplicitySolid22 mentioned Town in post Gas can
Town: Did you find it has...
11-28-2019
11:01 AM - Sgthawker mentioned Town in post Grease zerk pulled out of auger shaft while lubing.
Town Ariens current mo...
11-19-2019
11:47 AM - Town mentioned oneacer in post Ariens Deluxe 30" EFI (921049) End of the Driveway after Plow
...s to the slope, as oneacer suggested. If you ...
11:13 AM - Town mentioned Shaw351 in post ST1032 impeller shaft end play
...to the diagram that Shaw351 showed in post # 5 a...
11-17-2019
07:02 PM - Town mentioned Cutter in post Chute Radius on Ariens 921037
Cutters is the same as mine...
03:22 PM - Town mentioned 1132le in post Chute Radius on Ariens 921037
...thers here Sorry 1132le, mine is different t...
11-12-2019
06:40 PM - Town mentioned MarkC in post Choose: 926060 (B & S eng) or 926078 (NEW Ariens eng) ???
...ens as [MENTION=885]MarkChambers said. The cra...
11-08-2019
06:14 PM - Town mentioned Jackmels in post Carb adjustment
...ferent solution. Jackmels has a great deal of ...
10-16-2019
09:06 AM - Town mentioned Shaw351 in post TPMS reset tools
Hi Shaw351 My son with the ...
10-14-2019
06:04 PM - Town mentioned 1132le in post 28 Deluxe Throttle Speeds Question
...s two positions, as 1132le says.
10-06-2019
05:20 PM - Town mentioned enigma-2 in post How to make a gas gauge to fit the Ariens snowblower
...nk the gas cap that enigma-2 used is from a B&S e...
10-05-2019
04:02 PM - Town mentioned rslifkin in post How to make a gas gauge to fit the Ariens snowblower
Hi rslifkin A pic is worth m...
10-01-2019
06:05 PM - Town mentioned Shaw351 in post After market vs Original Equipment parts??
Hi Shaw351, At rest the sprin...
09-28-2019
11:38 AM - Town mentioned RIT333 in post Gas Gauge
...r the wire rod that RIT333 is concerned about l...
09-27-2019
07:12 PM - Town mentioned oneacer in post novice to snowblowers
...a tire brand? In oneacer post with the two ti...

  Quotes

12-08-2019
07:02 PM - Town quoted e.fisher26 in post Flywheel magnet came off
I could, but Id like to keep p...
06:46 PM - Town quoted drmerdp in post Modified chute
...r as exemplified by drmerdp for his chute design...
06:46 PM - Town quoted all3939 in post Modified chute
Ive been building modified ...
02:19 PM - Town quoted tabora in post Modified chute
Yes, I guess you could say ...
12-04-2019
10:50 AM - Town quoted oneacer in post How to set scraper bar and then skid shoes?
...... A little of topic, b...
12-03-2019
10:40 AM - Town quoted ed in cny in post 1332LE chute issue
Well I got to test my work on ...
12-01-2019
11:33 PM - notabiker quoted Town in post Grease zerk pulled out of auger shaft while lubing.
@notabiker yes that is th...
11-30-2019
08:56 PM - notabiker quoted Town in post Grease zerk pulled out of auger shaft while lubing.
Ariens current models use...
11-29-2019
02:07 PM - PixMan quoted Town in post '14 Deluxe Platinum 30 season start-up
Your fuel shut-off sounds...
02:01 PM - Town quoted SimplicitySolid22 in post Gas can
Town: Did you find it has the issues t...
11:09 AM - Town quoted PixMan in post '14 Deluxe Platinum 30 season start-up
....... The first time thi...
10:48 AM - Town quoted SimplicitySolid22 in post Gas can
That is awesome where did you get that...
11-28-2019
08:27 PM - SimplicitySolid22 quoted Town in post Gas can
I am not as strong so can...
07:43 PM - PixMan quoted Town in post '14 Deluxe Platinum 30 season start-up
Mine broke too at the fit...
04:05 PM - Town quoted Sgthawker in post Grease zerk pulled out of auger shaft while lubing.
Town Ok, you mention a ...
11:01 AM - Sgthawker quoted Town in post Grease zerk pulled out of auger shaft while lubing.
Town Ariens current mo...
11-27-2019
09:49 AM - Town quoted 1132le in post 1332LE chute issue
I don't see where he Mentio...
11-26-2019
08:37 PM - 1132le quoted Town in post 1332LE chute issue
I looked around for what ...
07:04 PM - Town quoted 1132le in post 1332LE chute issue
I had 2004 1332le but had t...
01:48 PM - Town quoted Brent Holm in post Which oil to use?...
No, oil dilution is more of an ...
 
For the best viewing experience please update your browser to Google Chrome