If my snowblower is still moving but i don't remember when the friction disk got replace should i just replace it
Last edited by Dannysno3blower; 11-08-2018 at 06:52 PM.
Originally Posted by Dannysno3blower View Post
OVERPOWERED is usually Adequate
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Ariens 1128 Pro, 826 dle, 2 Path pro's
|Post Thanks / Like - 1 Thanks, 2 Likes, 0 Dislikes|
Dannysno3blower thanked for this post
Join Date: Jan 2017
Location: Lawrenceville NJ
Look at the friction disk, if there are not pieces missing and it's pulling the machine then it does not need to be replaced however it is not a job you want to do in the dead of winter and they are only about $18 BUT PIA to replace, a very greasy job and can be frustrating, and you can't do it with gloves on.
1986 Ariens ST522, 5hp, 22"
1995 Murray Craftsman 10hp, 29" w. 12" impeller
A 1983 Real John Deere 10hp, 32" w. 12" impeller, 16" auger, 20" high front, cast iron gear box, chains
Noma 9hp, 27" w. 12" impeller
Noma 5hp, 24" w. 12" impeller, 20" high front
Gravely Convertible, 12hp Kohler cast iron, 26" width, 600 lbs of cast iron & steel, 2 speed impeller, 4 ground speeds
Dynamark 8hp, 26", 12" impeller, for sale
Several other 5hp, 8hp, several 2 cycle, all for sale