Snowblower Forum banner

Toro 521 traction clutch spring

3K views 3 replies 3 participants last post by  Joe25da 
#1 ·
It broke during the last storm. Meaning I was in constant drive. No disengage. Picked up the new spring at the dealer for $5. Took the bottom plate off 4x 3/8" bolts. Kinda tricky to get on, have to get the spring on the bracket first then pull thru the case and locked in. Took a couple tries but I got it, works like be again, also tool the time to check the drive system out all looks good
 

Attachments

See less See more
2
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top