|Topic Review (Newest First)|
|11-22-2016 07:36 PM|
|Clutch Cargo||I use 6mm marine grade braided line. You'll only have to do it once.|
|11-22-2016 06:04 PM|
|driz||Take some and go to a local boat or snowmobile shop, better yet call around. Just measure with a Mike and do get the same diameter. They sell it by the foot so at a generic repair place it's probably costing $7 compared to $20 for the exact same thing at name brand X. Places that rent tools have it too for fixing their rental stuff. That's where I'd start, cheapest.|
|10-31-2016 06:54 PM|
Taurus04: Excellent frickin' video Eh? Thank you very much!
nwcove: I bought 6mm for the rototiller, I guess I will have to wait for it to arrive to know if it is too big.
|10-31-2016 05:48 PM|
|nwcove||outboard motor starter rope, from a dealer of quality outboards, is about as good as you can get, but still is at the mercy of the rope guides its getting pulled through.|
|10-31-2016 05:36 PM|
might want to check out Donyboy73 on YouTube. The size (thickness) of the rope might make a difference.
|10-31-2016 05:10 PM|
|EdwardC||Interesting, if you look closely at that Cobra Cord, it looks like it could very well be UHMWPE.|
|10-31-2016 05:02 PM|
|Stebekk||Du er velkommen|
|10-31-2016 04:28 PM|
|E350||Takk skal du ha. Dyrt, men en uhÝrt livstidsgaranti !|
|10-31-2016 04:01 PM|
|Stebekk||SNOWBLOWER COBRA CORD | Cobra Pull Cord|
|10-31-2016 01:28 PM|
Best Starter Rope?
I just ordered some 6mm pull rope for the starter of a rototiller. It was advertised on Amazon as starter pull rope so I assume that it is made for that use.
But I am familiar with various qualities of rope (i.e., rope with Spectra woven in, etc.).
So do any of you have any suggestions for the best pull starter rope out there?
I want to "one and done" the rope in all my pull starter (recoil) small engines.