Snowblower Forum banner

826 shear pins

5K views 4 replies 4 participants last post by  GoBlowSnow 
#1 ·
I took the pins off today so I can spin the augers on the shaft after greasing. I don’t see any grove on the pins. They don’t look like can be sheared easily. They are identical to the photo of the new pins. Does anyone know are they shear pins or just regular pins ?
 
#2 ·
Not all pins have those grooves, The strength of the metal is the important part and if no grooves will still sheer when needed.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top