Snowblower Forum banner

Question Regarding Shear Bolts

1K views 3 replies 2 participants last post by  TOTHEMAX 
#1 ·
Hey guys. We have a BRAND NEW toro snow broom at work that keeps breaking shear bolts. I looked them up and this is the part number : https://www.amazon.com/GENUINE-OEM-TORO-PARTS-SCREW-HH/dp/B0195UHOKE

Question is, can I use a grade 5 bolt? Normally I wouldn't ask but the side that isn't braking has a grade 5 bolt that was installed at the shop (has the 3 / marks on the head). The side that breaks is the side I have replaced with a standard 5/16" shear bolt from the hardware store.

Thoughts?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top