New here. Need help finding parts
I have had this blower for about 6 years bought a couple parts when i got it but cant seem to find anything now with the model number on the plate. Could use all the help i can get. I need a project to work on this winter.
And it has a tecumseh 5hp but it doesnt have a model tag or stamp anywhere. I know its old but cant seem to find it anywhere. Looking it up online i cant even find a picture of it. None of the pictures look like my blower. Starting to think it was the only one built.
Join Date: Jan 2017
Location: Lawrenceville NJ
Atlas was made in the 70s and bought up by MTD. At one time you could get parts through MTD. They even had parts diagrams they could fax or email you.
The engine should be stamped on the top of the engine shroud. As for the machine, many parts such as bearings, pulleys, belts were outsourced and can be replaced by matching with existing parts. It may also be wise to keep your eyes open for a parts machine for harder to find stuff. Good luck. MH
1960 Ariens 45-10M
1961 Ariens 10M55
1977 Ariens 22000
1972 Ariens 10000
1990 Ariens ST724
1987 Toro 724
Murray Ultra 522
MTD Single stage
8 hp MTD hybrid plow
Yeah thats what i have been trying to do. But cant seem to find any of the same model. I wish i could post pictures to this thread. I would put pics up from the blower. Motor shroud doesnt have a stamp either. I looked everywhere on every part and took it apart. All i know is it might be a tecumseh hssk50