John Deer 1332DDE NO reverse
I have a John deer 1332 DDE No reverse! I have replaced the friction Disc, no help. I have made all the adjustments to the cables, clutch drive ect. NO Help. I have noticed that the drive disc flywheel sides back and forth just a little bit. Is it possibly a bearing going bad? Any help would be great Thank you
Join Date: Jan 2017
Location: Lawrenceville NJ
A video is the best with you moving the lever back and forth. Stand the blower on the auger housing, remove the bottom cover, and move the handle back and forth. While you are doing this, then hold the drive lever down using a clamp and turn the drive wheel liking at the rubber friction disk and friction plate.
1986 Ariens ST522, 5hp, 22"
1995 Murray Craftsman 10hp, 29" w. 12" impeller
A 1983 Real John Deere 10hp, 32" w. 12" impeller, 16" auger, 20" high front, cast iron gear box, chains
Noma 9hp, 27" w. 12" impeller
Noma 5hp, 24" w. 12" impeller, 20" high front
Gravely Convertible, 12hp Kohler cast iron, 26" width, 600 lbs of cast iron & steel, 2 speed impeller, 4 ground speeds
Dynamark 8hp, 26", 12" impeller, for sale
Several other 5hp, 8hp, several 2 cycle, all for sale