Toro 1128 LH Auger replacement - Snowblower Forum : Snow Blower Forums
 
LinkBack Thread Tools
post #1 of 8 Old 02-03-2019, 07:15 PM Thread Starter
Junior Member
 
Join Date: Feb 2019
Posts: 7
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 0
Likes (Given): 0
Likes (Received): 0
Toro 1128 LH Auger replacement

Just picked up a used Toro PMHD 1128 OHXE #38803
First off I am looking for the shop Manuel and if anyone knows where I can find a copy I sure would appreciate it! Searched but no luck. I am guessing its to new and hasn't hit the wild yet. I believe mine is a 2014 model. Picked it up yesterday and gave it a full once over today. Adjusted everything, oil change, new spark plug, new gear box oil etc.,etc. While inspecting it I noticed the LH auger is bent over/rolled over at the end of it next to the housing. I didn't notice it yesterday when testing it at his house as there was still snow in the housing. It is lightly touching the pivoting scraper as it turns. He must have hit something pretty hard as the bolts that hold the PS from going back to far are bent as well. There is no way to be able to reach in there and bend the blade back, its right next to the housing. So my question is do I have to completely remove the front end housing from the blower to access what I believe is a nut holding the impeller pulley on the back side of the impeller. Or is there an easier way? TIA!
Stone is offline  
Sponsored Links
Advertisement
 
post #2 of 8 Old 02-05-2019, 05:42 PM
Senior Member
 
Join Date: Feb 2014
Location: Northville NY - Southern Adirondack Mtns.
Posts: 1,331
Post Thanks / Like
Thanks (Given): 1
Thanks (Received): 88
Likes (Given): 23
Likes (Received): 216
Go to Toro.com You will be able to download a repair/service manual for free.
RIT333 is online now  
post #3 of 8 Old 02-05-2019, 06:02 PM
Senior Member
 
Zavie's Avatar
 
Join Date: Sep 2014
Location: Michigan
Posts: 1,013
Post Thanks / Like
Thanks (Given): 46
Thanks (Received): 80
Likes (Given): 355
Likes (Received): 162
Taryl covered a Toro repair just this week! Hmmm... did Slippers get a haircut just for the video? Anyway, "There's your dinner"

2016 Ariens Professional 28
2017 Toro Power Clear 721R
2018 Simplicity Select 1024
Zavie is online now  
post #4 of 8 Old 02-06-2019, 12:56 PM Thread Starter
Junior Member
 
Join Date: Feb 2019
Posts: 7
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 0
Likes (Given): 0
Likes (Received): 0
Quote:
Originally Posted by RIT333 View Post
Go to Toro.com You will be able to download a repair/service manual for free.
Thanks. I did download that one but the manual says its for 2004-2005 model years. I was hoping to find something more current.
Stone is offline  
post #5 of 8 Old 02-06-2019, 06:36 PM
Senior Member
 
Join Date: Feb 2014
Location: Northville NY - Southern Adirondack Mtns.
Posts: 1,331
Post Thanks / Like
Thanks (Given): 1
Thanks (Received): 88
Likes (Given): 23
Likes (Received): 216
Quote:
Originally Posted by Stone View Post
Thanks. I did download that one but the manual says its for 2004-2005 model years. I was hoping to find something more current.

I suspect that very little, if anything, has changed from then to yours - maybe the tires, and the engine manufacturer.
RIT333 is online now  
post #6 of 8 Old 02-06-2019, 06:43 PM
Senior Member
 
Join Date: Feb 2014
Location: Northville NY - Southern Adirondack Mtns.
Posts: 1,331
Post Thanks / Like
Thanks (Given): 1
Thanks (Received): 88
Likes (Given): 23
Likes (Received): 216
Quote:
Originally Posted by Stone View Post
Thanks. I did download that one but the manual says its for 2004-2005 model years. I was hoping to find something more current.

I suspect that very little, if anything, has changed from then to yours - maybe the tires, and the engine manufacturer.
RIT333 is online now  
post #7 of 8 Old 02-06-2019, 06:51 PM
Senior Member
 
Join Date: Feb 2014
Location: Northville NY - Southern Adirondack Mtns.
Posts: 1,331
Post Thanks / Like
Thanks (Given): 1
Thanks (Received): 88
Likes (Given): 23
Likes (Received): 216
Quote:
Originally Posted by Stone View Post
Thanks. I did download that one but the manual says its for 2004-2005 model years. I was hoping to find something more current.

I suspect that very little, if anything, has changed from then to yours - maybe the tires, and the engine manufacturer.
RIT333 is online now  
post #8 of 8 Old 02-10-2019, 07:59 PM
Senior Member
 
Join Date: May 2015
Location: NE Illinois
Posts: 577
Post Thanks / Like
Thanks (Given): 41
Thanks (Received): 51
Likes (Given): 139
Likes (Received): 116
https://www.toro.com/en/parts/partdetails/?id=44494

under parts the warranty language says 2015, so this page should have the proper year manual.

Paul
----------------------------------------------------------------
1995 Toro 724, 1988 Toro 521
1980 Toro 421, 1995 Craftsman 524
1997 Toro CCR 2500 & 1994 Toro CCR Powerlite
paulm12 is online now  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Snowblower Forum : Snow Blower Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome