John Deere 1032 - Snowblower Forum : Snow Blower Forums
Reply
 
LinkBack Thread Tools
post #1 of 36 Old 12-15-2014, 08:14 PM Thread Starter
Junior Member
 
Join Date: Dec 2014
Posts: 5
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 0
Likes (Given): 0
Likes (Received): 0
John Deere 1032

Hi Everyone
I bought a John Deere 1032 and I'm looking to repair and recondition it for the winter that will soon be apon us. I know it needs auger drive belts, I replaced oil and plug. The machine was mostly unused looks like it just sat, I cleaned it and she runs like a top. I would like to see if anyone has a repair/parts manual for it so I know general maintance, things I should check and parts I will need, if anyone has one please let me know.
Thank you.
Mark
JD 1032 MO is offline  
Sponsored Links
Advertisement
 
post #2 of 36 Old 12-15-2014, 08:22 PM
Moderator
 
detdrbuzzard's Avatar
 
Join Date: Jan 2012
Location: 42.23n/83.33w/636
Posts: 6,578
Post Thanks / Like
Thanks (Given): 213
Thanks (Received): 293
Likes (Given): 1654
Likes (Received): 584
hello mark, welcome to SBF!! you will need to post the serial number for your machine, JD had several companies produce snowblowers for them

current machines
1-toro2450E-38419. 1-toro3000E-38435. 1-toro 3650E-38445
2-toro 521E-38052. 1-toro xl824pt 38086
1-.............,TORO XL 624ps..............
1-............, TORO XL 824ps..............
william
detdrbuzzard is offline  
post #3 of 36 Old 12-15-2014, 09:34 PM
Senior Member
 
micah68kj's Avatar
 
Join Date: Oct 2011
Location: S. C. Pa. 39.755928, -77.577766
Posts: 4,927
Post Thanks / Like
Thanks (Given): 144
Thanks (Received): 275
Likes (Given): 380
Likes (Received): 927
Welcome to the forum. I just sold one of those. It's a beast. There is a grease fitting up inside that you need to grease. JTclays is the guy you want to ask. He seems to know quite a bit about them and Ray as well. They'll probably be along in a bit to point you in the right direction.
Attached Thumbnails
Click image for larger version

Name:	IMG_20140927_154843.jpg
Views:	130
Size:	237.7 KB
ID:	31658  

Joe

Sent from my junky old Hisense 7" tablet that I can barely see.
Toro 724
Toro CCR 3650E
Toro 5/21 sold
Ariens 5/22 ss ..Sold
Ariens Sno Tek 7/24 sold.
Old green plastic snow shovel... Sent.to shovel Heaven
Old quarry shovel for ice.
New.green shovel
micah68kj is online now  
post #4 of 36 Old 12-15-2014, 09:37 PM
Senior Member
 
micah68kj's Avatar
 
Join Date: Oct 2011
Location: S. C. Pa. 39.755928, -77.577766
Posts: 4,927
Post Thanks / Like
Thanks (Given): 144
Thanks (Received): 275
Likes (Given): 380
Likes (Received): 927
Quote:
Originally Posted by detdrbuzzard View Post
hello mark, welcome to SBF!! you will need to post the serial number for your machine, JD had several companies produce snowblowers for them
I believe the 1032 is Ariens or possibly a Frontier blower. Murray didn't make a 1032 for J.D. at least I don't think they did.

Joe

Sent from my junky old Hisense 7" tablet that I can barely see.
Toro 724
Toro CCR 3650E
Toro 5/21 sold
Ariens 5/22 ss ..Sold
Ariens Sno Tek 7/24 sold.
Old green plastic snow shovel... Sent.to shovel Heaven
Old quarry shovel for ice.
New.green shovel
micah68kj is online now  
post #5 of 36 Old 12-16-2014, 12:00 AM
Member
 
Join Date: Nov 2014
Posts: 65
Post Thanks / Like
Thanks (Given): 1
Thanks (Received): 0
Likes (Given): 0
Likes (Received): 3
Mark, I just bought a 826 a month ago and am pretty much 'done' going through it. I changed oil in it tonight, added new fuel line and filter, will get it finished up tomorrow night hopefully. I am assuming your 1032 will be alot like my 826 just bigger and more power (trust me I'd love a 1032 being the big boy, but so far enjoy the 826).

Here is the link I've been adding to/asking question with the help from members: http://http://www.snowblowerforum.co...questions.html

Read through it, should help. I forgot to add pics towards the end when I greased it and lubed things, and replaced the wheel bushing, took differential apart and cleaned/added new grease, then added new roller chain.

Mine is a 1983 btw - what year is yours?
badger08 is offline  
post #6 of 36 Old 12-16-2014, 05:58 PM Thread Starter
Junior Member
 
Join Date: Dec 2014
Posts: 5
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 0
Likes (Given): 0
Likes (Received): 0
The number on the back of the frame is PO32J 120009 M
I bought it at an auction for $145. thought I couldn't go wrong because it looked hardly used, electric start (which is new to me because I have always had the pull starts and would be dead before it would start), it even had the snow blower cab on it. Well I want to get it fixed properly before running long. I did see there was a few grease points which I will hit. Thank you for all the information.
Mark
JD 1032 MO is offline  
post #7 of 36 Old 12-18-2014, 12:31 PM
Senior Member
 
Bob Cat's Avatar
 
Join Date: Jul 2014
Location: Sault Ste. Marie Ontario
Posts: 109
Post Thanks / Like
Thanks (Given): 17
Thanks (Received): 7
Likes (Given): 59
Likes (Received): 26
I have a 49 page operator's manual for a 1986 JD 1026 that includes some information on how to change the belts, adjust the friction wheel etc...which probably would be similar to your model. I'll just need some time to scan it. If interested let me know. These are well built machines.
Bob Cat is offline  
post #8 of 36 Old 12-18-2014, 12:36 PM
Member
 
Join Date: Nov 2014
Posts: 65
Post Thanks / Like
Thanks (Given): 1
Thanks (Received): 0
Likes (Given): 0
Likes (Received): 3
Quote:
Originally Posted by JD 1032 MO View Post
The number on the back of the frame is PO32J 120009 M
I bought it at an auction for $145. thought I couldn't go wrong because it looked hardly used, electric start (which is new to me because I have always had the pull starts and would be dead before it would start), it even had the snow blower cab on it. Well I want to get it fixed properly before running long. I did see there was a few grease points which I will hit. Thank you for all the information.
Mark
Mark, do a search on the internet. But for the 826 I found the Tech Manual online and printed it out, it's pretty detailed. Right down to taking the engine apart. PM me if not and I will try to find it for you.
badger08 is offline  
post #9 of 36 Old 12-18-2014, 01:05 PM Thread Starter
Junior Member
 
Join Date: Dec 2014
Posts: 5
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 0
Likes (Given): 0
Likes (Received): 0
I have looked online and found a few things but not very detailed, maybe I will look up other models and get something better. I ordered belts yesterday and should get early next week so I can get the auger to work better. I would just hate to get out in the snow and have a problem so I want to go over it well. Thank you for all your help. Mark
JD 1032 MO is offline  
post #10 of 36 Old 12-18-2014, 01:28 PM
Senior Member
 
Grunt's Avatar
 
Join Date: Nov 2013
Location: New Lenox
Posts: 1,999
Post Thanks / Like
Thanks (Given): 248
Thanks (Received): 288
Likes (Given): 2901
Likes (Received): 537
I found this Deere manual online quite awhile ago. It is 33 meg in size and can take some time to download. I hope this helps.

https://www.dropbox.com/s/9k1uzy1s5s...1234-01740.pdf

Sorry, welcome to the forum JD 1032.

Toro 8/24 (38080) 1989
Toro 721-QZR (38743) 2015 (Hemi Predator Power)

Experience is something you don't get until just after you need it.
Grunt is online now  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Snowblower Forum : Snow Blower Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in













Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome