Mid 90's Ariens ST824 932029 part question - Snowblower Forum : Snow Blower Forums
 
LinkBack Thread Tools
post #1 of 9 Old 02-02-2016, 04:14 PM Thread Starter
Junior Member
 
Join Date: Feb 2016
Location: Minnesota
Posts: 3
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 0
Likes (Given): 0
Likes (Received): 0
Mid 90's Ariens ST824 932029 part question

Hi everyone, longtime lurker on the maintenance thread and first time poster. I've been looking everywhere for a sheave pulley replacement for my snowblower which is otherwise in great shape. Somehow the old pulley chipped and started tearing belts apart, I'd hate to have to get rid of it because of this.

Its an Ariens ST824, 932029 bought in 1995 or so.

The part in question is 03233400, I've emailed Ariens and they do not have any equivalent in another part number nor do they make this part any longer.

Anyone know of a good site to get used hard to find parts, every place I've found online shows its no longer available.

Last edited by spyder357; 02-02-2016 at 04:21 PM.
spyder357 is offline  
Sponsored Links
Advertisement
 
post #2 of 9 Old 02-02-2016, 04:35 PM
Super Moderator
 
Kiss4aFrog's Avatar
 
Join Date: Nov 2013
Location: Hudson, WI
Posts: 9,218
Post Thanks / Like
Thanks (Given): 521
Thanks (Received): 687
Likes (Given): 3905
Likes (Received): 1498
Garage
to the forum spyder

Ariens parts radar for looking up parts: http://partsradar.arinet.com/scripts...inpwd=consumer

Ply-engine 3.30 dia vj6 03233400 Order now for same day shipping. 365 day return policy. RepairClinic.com

Snowmobile Parts, Go Kart Parts, Lawnmower Parts, ATV Parts, and more | MFG Supply

Chains, Belts, Pulleys & Sprockets | MSCDirect.com


.
Make sure the windows are up before the snow plow goes by !!

Please help keep the lights on by subscribing:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by Kiss4aFrog; 02-02-2016 at 04:44 PM.
Kiss4aFrog is offline  
post #3 of 9 Old 02-02-2016, 05:15 PM
Member
 
conwaylake's Avatar
 
Join Date: Feb 2014
Location: Central NH
Posts: 61
Post Thanks / Like
Thanks (Given): 8
Thanks (Received): 10
Likes (Given): 7
Likes (Received): 7
03229200 pulley, but for Serial Number > 5150

First please post the serial number of your 932029.
Also the engine model number would be VERY helpful here.

What is the shaft dimension of the old pulley?
Is it a 3.30 inch outer diameter ?

Pulley you mention is for serial numbers at or below 5149,

Only the FIRST 5000 machines built under 932029 model apply.
Pretty low serial number.

I cannot put down a direct link to the parts list. Sorry.

So if you look at ITEM 40 on partsradar for SN 005150+

It says that pulley (sheave) Item #40 is 03229200.

Also of interest is the different belt #, BUT the large pulley is the same:
Here is everything that 'touches' that pulley:
(formatting apparently does not allow for 'columns': )

Item Description SN 101 - 5149
------ ----------- ----------- --------
57 Engine Pulley 8.0 x 1.25 07307400
38 Belt 07225300
40 Engine sheave
(3.3) 03233400
7 Engine 8 HP Tec w/PTO


Item Description SN 5150+
------ ----------- ----------- --------
57 Engine Pulley 8.0 x 1.25 07307400
38 Belt 07219200
40 Engine sheave 03229200 no size info given
7 Engine HMSK80-155525U


Does not mean it is a 100% fit. You have to try and determine if the motor has any differences. such as the size of the shaft. Looks like its a cam shaft take off ...


SB0 - Craftsman
8.5HP/27" 536.881850 (2006) Motor: Briggs 1150 Snow Series
SB1 - SB3 Ariens ST824 (Model #924050)
SB4 - 2018 Ariens Deluxe 24


Last edited by conwaylake; 02-02-2016 at 06:47 PM. Reason: fixed diamter was 3 inch, corrected item vs Serial Number
conwaylake is offline  
post #4 of 9 Old 02-02-2016, 06:29 PM
Senior Member
 
Join Date: Apr 2015
Location: Wisconsin
Posts: 150
Post Thanks / Like
Thanks (Given): 2
Thanks (Received): 16
Likes (Given): 6
Likes (Received): 20
Do yourself a favor and post a pic or some dimensions. I bet one of us has just what you need...
sidegrinder is offline  
post #5 of 9 Old 02-02-2016, 07:30 PM Thread Starter
Junior Member
 
Join Date: Feb 2016
Location: Minnesota
Posts: 3
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 0
Likes (Given): 0
Likes (Received): 0
Thanks for the replies.

The serial number is 000383 so its definitely under 5000 and the right part number. I did get a response back from Ariens and they said no cross parts or alternatives available so at least according to them none of the other designs fit or work...not to say one isn't close enough maybe. Kiss4aFrog, I contacted those parts dealers, all said 0 in stock or available to order.

Took a measurement, looks like its 3.3 od and the shaft is .75

You can see in the picture chunks of it are missing.
Attached Thumbnails
Click image for larger version

Name:	20160202_172511.jpg
Views:	43
Size:	134.5 KB
ID:	77161  

Last edited by spyder357; 02-02-2016 at 07:35 PM.
spyder357 is offline  
post #6 of 9 Old 02-02-2016, 08:30 PM
Super Moderator
 
Kiss4aFrog's Avatar
 
Join Date: Nov 2013
Location: Hudson, WI
Posts: 9,218
Post Thanks / Like
Thanks (Given): 521
Thanks (Received): 687
Likes (Given): 3905
Likes (Received): 1498
Garage
On the web page it says they're out of stock but expected ship date is 9 feb if ordered now, BUT I didn't call them to confirm that. ??
Ply-engine 3.30 dia vj6 03233400 Order now for same day shipping. 365 day return policy. RepairClinic.com

.
Make sure the windows are up before the snow plow goes by !!

Please help keep the lights on by subscribing:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Kiss4aFrog is offline  
post #7 of 9 Old 02-02-2016, 08:36 PM
Super Moderator
 
Kiss4aFrog's Avatar
 
Join Date: Nov 2013
Location: Hudson, WI
Posts: 9,218
Post Thanks / Like
Thanks (Given): 521
Thanks (Received): 687
Likes (Given): 3905
Likes (Received): 1498
Garage
IF .... you took a Dremel or something similar and smoothed out those sharp edges the main part of the belt should be ok, like 95% of it.

I'd check the alignment of the sheave with the pulley below and the condition and alignment of the idler pulley. The alignment is critical and if the auger housing to the transmission body has any looseness or flex it will eat belts.

That raised edge of the sheave is just to keep the belt from running off the edge and it's not something critical so to speak. It just keeps the belt in place when it's not under tension.

.
Make sure the windows are up before the snow plow goes by !!

Please help keep the lights on by subscribing:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Kiss4aFrog is offline  
post #8 of 9 Old 02-02-2016, 10:06 PM
Senior Member
 
Jackmels's Avatar
 
Join Date: Feb 2013
Location: Ma.
Posts: 2,088
Post Thanks / Like
Thanks (Given): 109
Thanks (Received): 168
Likes (Given): 361
Likes (Received): 690
You could probably fill/repair/fab the broken part with Quicksteel or a similar product.
Jackmels is online now  
post #9 of 9 Old 02-02-2016, 10:10 PM Thread Starter
Junior Member
 
Join Date: Feb 2016
Location: Minnesota
Posts: 3
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 0
Likes (Given): 0
Likes (Received): 0
Quote:
Originally Posted by Kiss4aFrog View Post
IF .... you took a Dremel or something similar and smoothed out those sharp edges the main part of the belt should be ok, like 95% of it.

I'd check the alignment of the sheave with the pulley below and the condition and alignment of the idler pulley. The alignment is critical and if the auger housing to the transmission body has any looseness or flex it will eat belts.

That raised edge of the sheave is just to keep the belt from running off the edge and it's not something critical so to speak. It just keeps the belt in place when it's not under tension.
Thats a good idea on the dremel.

I'll check on that, once I saw the pulley I didn't even think about any sort of alignment issue. Is there any easy way to make sure everything is aligned? Searching i see there is some sort of laser alignment tools and different sites/threads saying more then 1/8th in off would cause problems.
spyder357 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Snowblower Forum : Snow Blower Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome