CCR 1000 fix or toss - Snowblower Forum : Snow Blower Forums
 
LinkBack Thread Tools
post #1 of 7 Old 02-01-2014, 10:05 PM Thread Starter
GTP
Member
 
Join Date: Dec 2010
Location: Greensburg, PA
Posts: 48
Post Thanks / Like
Thanks (Given): 1
Thanks (Received): 1
Likes (Given): 0
Likes (Received): 0
CCR 1000 fix or toss

I was given an absolutely mint little CCR-1000 it doesn't have a piece of dust on it, brand new paddles, the carb is sparkling it looks like it came off the dealer floor. The PO bought it brand new ran it a few times over the years but said he started it recently and while it was warming chunk chunk done.

I took it apart and it appears the little HSK tossed the lower rod cap and its needle bearings. I examined the crank and it doesn't appear nicked or scratched parts are $110 for rings, piston and rod. It wasn't straight gassed he was using good oil and gas mix- production flaw or just years of sitting?

Save it or toss it?

Toro 22040 Commercial Suzuki
Toro 22035 Commercial Suzuki
Toro 22031/35/40 Commercial Suzuki Frankenstein
Lawn Boy 10324 DF jetted and R-Tek'd "The Hammer"

Lawn Boy Collection (2 D's, 2 F's, 2 DF's, 2 Ms)
John Deere JX75 5spd, BBC, Kawasaki 6.0hp
Comm Snapper WR 2 Cycle WTI-125 4hp 2cycle

Salvation is not found in a religion...it's found in a person, Jesus Christ, our Lord and Savior.
GTP is offline  
Sponsored Links
Advertisement
 
post #2 of 7 Old 02-01-2014, 10:24 PM
Moderator
 
detdrbuzzard's Avatar
 
Join Date: Jan 2012
Location: 42.23n/83.33w/636
Posts: 6,572
Post Thanks / Like
Thanks (Given): 213
Thanks (Received): 293
Likes (Given): 1645
Likes (Received): 580
around here its only worth about $110 or so. i've got a powerlite in the garage that needs a carb. i paid $30 for the machine and by the time i buy a carb i'll be up around $130, i can buy one running already for that price so i'm thinking " pull the electric starter and put it on the other powerlite " then decide what i want to do with the rest of the doner machine. is this going to be a backup for your main blower

current machines
1-toro2450E-38419. 1-toro3000E-38435. 1-toro 3650E-38445
2-toro 521E-38052. 1-toro xl824pt 38086
1-.............,TORO XL 624ps..............
1-............, TORO XL 824ps..............
william
detdrbuzzard is offline  
post #3 of 7 Old 02-01-2014, 10:26 PM
Senior Member
 
Join Date: Dec 2013
Location: Massachusetts and Maine
Posts: 792
Post Thanks / Like
Thanks (Given): 3
Thanks (Received): 27
Likes (Given): 0
Likes (Received): 42
Sounds like you really like it. Might as well fix it. MH
motorhead64 is offline  
post #4 of 7 Old 02-01-2014, 10:44 PM
Senior Member
 
Join Date: Dec 2012
Posts: 394
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 0
Likes (Given): 0
Likes (Received): 0
I would look for a used engine to put in it. Maybe even just a used blower as its still in mint condition and transfer all the parts you need. Ebay and craigslist are great places to look for parts.

3 Ariens 522 Single Stage
Toro 3521 Repowered with a 6.5hp
Craftsman 521 (selling)


other toys
Troybuilt Horse 70s or 80s model
Troybuilt Econo-horse
John Deere Jx75
John Deere Js46
John Deere 111

and a few other parts machines.
Colored Eggs is offline  
post #5 of 7 Old 02-01-2014, 10:44 PM Thread Starter
GTP
Member
 
Join Date: Dec 2010
Location: Greensburg, PA
Posts: 48
Post Thanks / Like
Thanks (Given): 1
Thanks (Received): 1
Likes (Given): 0
Likes (Received): 0
Quote:
Originally Posted by detdrbuzzard View Post
around here its only worth about $110 or so. i've got a powerlite in the garage that needs a carb. i paid $30 for the machine and by the time i buy a carb i'll be up around $130, i can buy one running already for that price so i'm thinking " pull the electric starter and put it on the other powerlite " then decide what i want to do with the rest of the doner machine. is this going to be a backup for your main blower
I know-they only go for $30-$100 around here in various forms. I am having a hrad time because I never saw one so clean..I tried ebaying a motor but again people want $50 for a beaten runner and $100 for a motor on ebay. Locally there are many around but they don't run and, who knows if they do, for how long. I have a very trusty MTD with the Techy845 in it that has been nothing but reliable for years. I was looking into an older 2 stage Ariens (other thread in Ariens section) but the seller has yet to respond. This probably would become a back up though way too small for my business lot and perhaps just something my wifey can use when I am not home.

Quote:
Originally Posted by motorhead64 View Post
Sounds like you really like it. Might as well fix it. MH
I do kinda like it but having problems justifying the cost to rebuild it.

Toro 22040 Commercial Suzuki
Toro 22035 Commercial Suzuki
Toro 22031/35/40 Commercial Suzuki Frankenstein
Lawn Boy 10324 DF jetted and R-Tek'd "The Hammer"

Lawn Boy Collection (2 D's, 2 F's, 2 DF's, 2 Ms)
John Deere JX75 5spd, BBC, Kawasaki 6.0hp
Comm Snapper WR 2 Cycle WTI-125 4hp 2cycle

Salvation is not found in a religion...it's found in a person, Jesus Christ, our Lord and Savior.
GTP is offline  
post #6 of 7 Old 02-10-2014, 09:44 PM
Senior Member
 
Join Date: Oct 2013
Posts: 109
Post Thanks / Like
Thanks (Given): 0
Thanks (Received): 0
Likes (Given): 0
Likes (Received): 0
First it was given to you.Second sounds like you already got it apart so I'd wait till the off season to see if you could pickup a engine cheap. It's not like it takes up that much storage space, but that's just me. My wife keeps threatening to hire someone to clean out the garage of all of my stuff and projects (not what she calls them )
TimY is offline  
post #7 of 7 Old 02-12-2014, 11:11 PM Thread Starter
GTP
Member
 
Join Date: Dec 2010
Location: Greensburg, PA
Posts: 48
Post Thanks / Like
Thanks (Given): 1
Thanks (Received): 1
Likes (Given): 0
Likes (Received): 0
Quote:
Originally Posted by TimY View Post
First it was given to you.Second sounds like you already got it apart so I'd wait till the off season to see if you could pickup a engine cheap. It's not like it takes up that much storage space, but that's just me. My wife keeps threatening to hire someone to clean out the garage of all of my stuff and projects (not what she calls them )
I may just put a piston and some rings in it. The rod is expensive but I can get one. Hmmmm wonder how my couch will feel when my wife sees my new projects

Toro 22040 Commercial Suzuki
Toro 22035 Commercial Suzuki
Toro 22031/35/40 Commercial Suzuki Frankenstein
Lawn Boy 10324 DF jetted and R-Tek'd "The Hammer"

Lawn Boy Collection (2 D's, 2 F's, 2 DF's, 2 Ms)
John Deere JX75 5spd, BBC, Kawasaki 6.0hp
Comm Snapper WR 2 Cycle WTI-125 4hp 2cycle

Salvation is not found in a religion...it's found in a person, Jesus Christ, our Lord and Savior.
GTP is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Snowblower Forum : Snow Blower Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome