auger belt replacement on a 2010 Powermax 826 OXE
is it difficult to change the auger belt on a 2010 Powermax 826 OX? I discover when I engage the auger the engine dies and some smoke is coming out from the right side of the plastic belt housing. I look at the service manual and it does not seem too difficult to do the job.
You have a Problem causing the belt to Smoke. Sounds like the auger is stuck, possibly something is jammed in the impeller. Try to manually turn the impeller to see if it will turn. I've seen one with a Rock Jamming the Impeller.
Originally Posted by Jackmels View Post
Toro 8/24 (38080) 1989
Toro 421-QZE (38585) 2008
Experience is something you don't get until just after you need it.