Snowblower Forum banner
Over the years I've removed and cleaned more than a few injectors from ATV's, sleds and large outboards, (oddly enough never from an auto tho). Now with Ariens having their EFI on the market for a few years now, warranties are finishing up, the time is going to come for said owners to want/need...
I'm taking a page from the Yamaha book here... I've been wanting to experiment and do some of my own R & D in regards to a chute liner for some time now. Yamaha has set the standard, (now it wont look it but...) I'm basing my insert off of their design. I've been waiting months to get the...
Toro 928 HD Heated Grip Install "How-to"
Just a few pics from the past. A powerful and tough old girl, this 1028 threw the snow great even before adding the impeller kit. I only had 2 minor issues to speak of and that is the balance made it a bit light in the front and the vibration from the SnowKing 358cc Tecumseh. (Having arthritis...
I figure my SB stable is complete now since I happened along this 1 1/2 year old HD 928. Once I brought it home I immediately drained the oil to begin with then proceeded to go over it while dis-assembling the bucket as I went. PO said 15 hours use and upon examination I believe it. I took...
2008 26" MTD Pro that I've owned for number of years. It's been a darn good working SB for me. It's somewhat light and has a great balance and feel. So I took it from old & gray to a fresh faced (what I call a Yamaha blue) machine. \ The poly skids I made for it really make a good difference...
I've found there doesn't seem to be much if any info regarding the Certified/Champion SB's in the 22 and 24" models here on the site. In the interest there are a few visitors looking for maintenance information, I decided to make this into a Showcase post. I bought this Certified SB new back in...
Sweet little 12 amp 120v blower, 18" width I recently acquired. Serial number puts it at a 2009 model year. Will be an excellent addition for my front deck, nice and light, no more shoveling over the railing! just to add I've used it twice now on deck with 4 inch snowfalls, fantastic and...
The first blower I purchased used
1987 Ariens ST824, 924050, upgraded
Frank, Juneau, and The Badger left to right
1978 Ariens 8 hp Deluxe 924026 with differential lock out
1971 Ariens Sno-Thro 24" 910962 with hemi Predator 212
Photos of restoration process of this snow blower. I did a valve job, replaced carburetor, muffler, head gasket, axle bushings and impeller bearing. The auger bushings were in excellent condition, so I didn't replace them. The machine was disassembled, degreased, primed and painted. This was...
2019 Craftsman 88794
2011 Husqvarna 12527HV
1999 Yard Man 31ae653G501 (Yellow and green)
1990 Craftsman Canada C950-52320-3 (Red)
Top