Snowblower Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Snowblower Repairs and Maintenance Forum
    First time post for me. I need to replace the auger belt and it looked to me this was a 34” length. I have the belt threaded but cannot get the wheels to turn to get the belt to slip on. Maybe I needed the 35” length? What is the pro secret to get the belt on? Thank you - Matt Williams (MN based).
  2. Snowblower Repairs and Maintenance Forum
    I own an older Husqvarna EXLT 1650 (?2012) with hydrostatic transmission. I recently have issues with the drive belt jumping off the drive pulley and flange after moving a few feet. Most typically the belt will jump off when I release the lever that disengages the idler arm pulley. I replaced...
  3. Snowblower Repairs and Maintenance Forum
    Hi, I’m new to the forum and am glad to have found such a place! I’m trying to find which part number or belt size to replace the old auger belt (which has broken) on my MTD Snowflite 310-600A serial number K159B. It is a circa 1980 machine. I can’t find the manual for it online anywhere. If...
  4. Snowblower Repairs and Maintenance Forum
    Hi. I'm a new member and stumbled across this page whilst searching for a solution to my latest problem with my Honda HS 760 snowblower. A brief summary follows: I was working on clearing my driveway and the machine worked just as it's always done. I had it serviced (the "feed screw shafts"...
  5. Snapper Snowblowers
    Hello!! I am mechanically inclined but have to admit defeat. I noticed that my machine has not been throwing snow like it used to. I replaced the auger belt and adjusted the free play, but less than a minute into using it, the belt came off!! I am waiting until it warms up a little before I...
  6. Snowblower Repairs and Maintenance Forum
    Working on a bud's model 31as6gn3711 Troy Bilt 8526 blower. He had installed a 754-0430b (3/8 x 35'') cogged auger belt, which was too small to turn the auger. It appears that this model takes a 1/2 x 35'' auger belt. After installation, the belt (# 954-04050 / 754-04050) appears to be dragging...
  7. Ariens Snowblowers
    Hi, I picked up an old Ariens snowblower that works fine except it's missing the belt guard. This is really only important to keep hands out but also to keep the snow out so the belt doesn't slip. I'm really only interested in selling this snowblower or giving it away as I have a snowblower...
  8. Ariens Snowblowers
    Hi, How can you tell when you should replace Ariens belt? I have a two stage, is it doable at home, or should I take it into a shop?
  9. MTD Snowblowers
    Hello everyone, Need your help, looking for drive belt and auger belt for a MTD huskee supreme 30” two stages snowblower. Got this used snowblower, don’t know the model number since the label is missing, according to the previous owner it has a Tecumseh LH318SA engine. Thanks.
1-9 of 9 Results
Top