Snowblower Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Ariens Snowblowers
    Hello, My auger was not turning and it needed a new belt. I was able to fix that, and it works. However, when I try to go forward or backward I get nothing. I knew there is good tension on the Drive belt as I tried to match the tension for the auger belt with that. Any Idea what I could have...
  2. Snowblower Repairs and Maintenance Forum
    MTD/Yard Machines 26" Snowblower model 31AE6COF300 Has a Tecumseh 80-110/ hmsk85 155905b engine Though it moves forward/backwards on its own, the wheels stop turning when it gets bogged down, even in light snow. I can also get the wheels to stop turning by holding it back with minimal effort.I...
  3. Craftsman Snowblowers
    I have a 2017 24inch Craftsman snowblower. Last winter it started hesitating on the drive function. After a few minutes, and pulling the lever a few times, it would work just fine. This winter I decided to try and track it down. After taking off the cover I noticed the drive belt idler pulley...
  4. Snowblower Repairs and Maintenance Forum
    Was just about to get started on replacing these belts on this snowblower and then discovered this forum. Was hoping to get some advice, tips or general cautions before I start to take it apart. Never worked on anything like this before so you can say I am a newbie for sure. Dont have a truck to...
1-4 of 4 Results
Top