Snowblower Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Troy-Bilt Snowblowers
    Hi: I have a Troy-Built, Storm 2410, OHV 179cc 24" snow thrower. Model 31AM62N2711. It has a MTD-PowerMore Engine. I got the thrower for free. It's in good shape about 4-5 years old (per the serial #). The pull cord will not turn the engine over. It's locked up. The thrower sat outside...
  2. Snowblower Repairs and Maintenance Forum
    I can get my Craftsman 123cc 4-cycle snowblower to start. Once started, it will run for anywhere between 5-20 seconds. During that time, an abnormal about of smoke comes out of the exhaust including what looks to be droplets of oil. Here's the next challenging issue...after the engine dies...
  3. Snowblower Repairs and Maintenance Forum
    Awhile back I was having problems with fuel delivery and spark on my sno-tek lct 208cc engine. To adjust the valve, I used the rope in the cylinder trick, then turned the engine by hand, just enough to keep the valve in place. I made all the adjustments, turned it again by hand to remove the...
  4. General Snowblower Discussion
    Hi! Last summer, I was given my very first snowblower : ~1980 Ariens 924050, 24 inches with an 8 hp tecumseh engine. It was not in perfect shape, but after changing some parts (oil, spark plug, belts, grease and carburator gaskets), it runs pretty well for a 40 years old machine. I am not an...
1-4 of 4 Results
Top