Snowblower Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
629 Posts
Discussion Starter #1
Last week east coast snowfall, consensus seemed to be wet snow...
For all you SM out there, how did it fare in the 4-6"+ of WET snow.
Would be curious how it behaved.
 

·
Super Moderator
Joined
·
6,670 Posts
lets hear it snowmaster owners
 

·
Registered
Joined
·
13 Posts
I was able to try mine on an old compacted wet snow bank before I got to today's wet snow this morning and it chewed it up without really any issue. I would think it's good for 10-12" of super wet slop. What impressed me the most was how far the snowmaster can throw even wet snow. The high speed auger really gets it out of the way and into the air nicely. I didn't really want a chinese engine, but this Loncin 212cc starts nicely and runs very smoothly... I hope it lasts!
 

·
Registered
Joined
·
629 Posts
Discussion Starter #4
Interesting to hear.

I don't even bother trying my SS with wet compacted snow, even IF the rubber auger was able to bite into it and flip it into the chute. For sure, what goes in (which is a bite of wet compacted snow) will just end at the chute and clog more often than not.

With the Side Augers being Metal on the SM, I can see it would potentially cut into wet snow. I don't see how it would not clog though, but I presume a smaller bite might now overwhelm the throat of the chute
 
1 - 6 of 6 Posts
Top