Snowblower Forum banner

1 - 1 of 1 Posts

1 Posts
Discussion Starter #1
Hi everyone,

I recently acquired a Ariens ST1032, model number 924073, serial 014778 for free. I'm pretty excited about the project and getting it running again.

It is in decent shape and I have a decent understanding of how it all works.

However, a lot of the linkage from the handles/throttle position lever, etc is loose or not in its proper place. I cant for the life of me find a diagram or photo online about how it all should be laid out.

Can anyone that has this model take a picture and post it so I can see? Basically up underneath the plate where the throttle position lever goes through.

Thank you for any help
1 - 1 of 1 Posts