For diameter it seems all the Ariens I have worked on have a 1”dis shaft, I have a Husqvarna 254cc made by LCT and a Ariens 254cc also made by LCT but the Ariens version has a 1” shaft and the Husqvarna version has a 3/4 shaft
Need to put it away for the 'summer' but service manual PDF does not give a general maintenance checklist.
Is there a list/link somewhere you can point me to?
-Oil change (of course)
-Non-ethanol fuel stabilized (I add Stabil whenever I fill up the gas can at the pump)
-Remove wheels apply...
Two questions prior to storage for the summer.
I have gas with fuel stabilizer still sitting in blower. Do I just fire up the machine and let the machine run till it turns itself off when it runs out of gas ? Or do something else. Or more.
Oil- I bought the machine in March of 2019 and it...
I just picked up an Ariens 932006 Sno-Thro that had been sitting at the curb for a couple of days. Hopefully I can get it into operational condition again.
It's definitely rusty and crusty. The discharge chute and throttle cable are rusted in place, for example. However, the engine is free...
Does anyone have the instructions for removing the right hand track wheel in order to access the two grease fittings in there? My book says refer to the service manual. I didn't get one of those