Snowblower Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
709 Posts
Discussion Starter #1
In the shed since March untouched. The tank was empty so I put some gas in it, opened the fuel valve, choked and primed, and it fired on the first pull. Fantastic!!!!! Apparently the JB Weld carb repair is still holding!!!
 

·
Super Moderator
Joined
·
9,892 Posts
For those of us with no ability to remember anything past yesterday what is the "JB Weld, Carb repair" ??

Congratulations on the easy first of the season start up :wavetowel2::wavetowel2:
 

·
Registered
Joined
·
709 Posts
Discussion Starter #4
For those of us with no ability to remember anything past yesterday what is the "JB Weld, Carb repair" ??

Congratulations on the easy first of the season start up :wavetowel2::wavetowel2:
You don't remember the details of my life? I thought we were closer!!!


A few years ago I was fed up with the crummy idle. I disassembled a bunch and determined there was a problem in the idle passage next to the main just up the center. So I chiseled it apart, wired out the passages and managed to JB over it and keep the passage open. Idles like a big, rusty greasy kitten :D
 

·
Registered
Joined
·
1,431 Posts
JB weld has rescued many a cheapskate like me!! ;>P congrats!

The term "cheapskate" has been moved to the List of politically incorrect terms to describe people.

The new and approved term is "notoriously thrifty"
 
1 - 8 of 8 Posts
Top