Snowblower Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
765 Posts
Discussion Starter #1
Looking for a used Bucket housing for a 8-26 MTD.

I believe the P/N is 684-0052C or some version of that in Cub Cadet and other MTD brands.

PM me if you think you have something. Thanks.
 

·
Premium Member
Joined
·
463 Posts
GEvening T, I Googled that part number to see if I had one, but it comes up as a 22" tub. Any other part numbers?? Model numbers?? Where are you located??

Thanx, Jay
 

·
Registered
Joined
·
765 Posts
Discussion Starter #4 (Edited)
This is the 8-26 machine I am talking about. The housing is Item 5 on the blower housing assembly in the link below. It is shown as no longer available.

https://www.jackssmallengines.com/jacks-parts-lookup/manufacturer/cub-cadet/mtd-legacy-1985-2005/mtd/31-snow-throwers/1996-models/316e640f352-1683580-1996/blower-housing-26

It does come up as a 22" housing. So does the auger assembly. That may be deceptive/confusing choice of a description or just a typo.

The part you show above may be interchangeable but I don't know. In any event, it makes no sense for me to pay that price.
 

·
Registered
Joined
·
765 Posts
Discussion Starter #5
Still looking.....This is the vintage with 3 bolts on the auger shaft bearings. the newer design uses 2 bolts.
 

·
Registered
Joined
·
2,250 Posts
I have access to a Red 26" Auger Complete. PM if Interested.
 

·
Registered
Joined
·
765 Posts
Discussion Starter #9
1 - 10 of 10 Posts
Top