[crazzywolfie]

i doubt it is too hard to put the tracks on but i am still confused weather it started out as a tracked machine or wheeled. it has quite a slope for a wheeled machine but it is missing quite a bit of the stuff that is normally on them. it does at least look like the machine may not get maintained as good as it should based off the skids be worn pretty good and not properly adjusted.

 

[crazzywolfie]

after doing a bit more searching almost looks like it may have originally started as a wheeled machine but that slope is from either taller tires or all the wear done to the bucket from not keeping on top of adjusting the skid. i was also disapointed to find out that it is a gas engine. i was expecting it to be a diesel engine considering it looks different and that is what kubota is known for. if it had been diesel i think $450 might not have been too far off but since it is gas it is definitely overpriced especially since these machines are usually a pain to find parts for if you ever do need them.