Snowblower Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3,016 Posts
Discussion Starter #1
Murray 10/29 G2914050

Shifter is locked, friction disk is not sliding, somewhere underneath in the guts. I'm afraid I'm going to have tear out 1 piece at a time. Feels like there's a hump that needs to get over, almost like the lobe on a cam. It wants to but can't. The friction disk is loose on the hex shaft and will slide, moves just a little both ways so it's not frozen, not enough to shift, but something somewhere is preventing it from moving sideways
20210205_130904.jpg
20210205_130904.jpg
20210205_130908.jpg
. The shifter rod is disconnected. A warm weather project.
 

Attachments

·
Registered
Joined
·
112 Posts
Try taking the hex shaft out, and sand away the rust . Light Lube, and re-assemble . Photo appears to show heavy rust at left side of shaft
 

·
Registered
Joined
·
1,937 Posts
Try taking the hex shaft out, and sand away the rust . Light Lube, and re-assemble . Photo appears to show heavy rust at left side of shaft
Yes sir, the whole thing needs cleaning/servicing, not just that shaft from the looks of it.
 
1 - 3 of 3 Posts
Top