Hi everyone, first post. I'm in NW CT, have a 2003 Simplicity 1060e (24" with a 10HP Briggs), the equal of today's Signature Pro. Bought this machine when I was in a differdent house. This has been an awesome machine, but it's too small of a cut for the driveway with a 3 car pad area that I need to throw the snow 35' to the side to get snow away from the house. With the Simp this ends up being a double throw, which on gravel is tough to clear due to having the skids up high.
I was originally leaning towards a Honda 928 tracked machine to handle the gravel, sloped area of the drive, sloped area around the house foundation,and to clear the basement door for off season storage but I'm concerned that the Honda is underpowered.
The new Simplicity Pro looks nice but there is no dealer close by. I have 2 Ariens dealers within 10 minutes. First was leaning towards 28 Pro because it's most similar to my current Simp but then saw the 28 SHO which appears to be a bargain, even after the cost of adding heated grips.
My main goal is to get a bigger cut, throw further than now and as far as posssible in real world (not paper specs) and get done faster than now. So I'm now thinking 28 SHO with a weight kit to keep the front end down for uphill in the drive where the front end lifts because I have the skids up for gravel. Thinking the throw distance on the 28 SHO with the 14" SHO impeller will be better than my Simp with the 12" impeller.
Not afraid to spend a few $ more for the right machine but the 28 Pro is a lot more and thinking that maybe it's simply overkill.
Appreciate everyone's feedback in advance.
I was originally leaning towards a Honda 928 tracked machine to handle the gravel, sloped area of the drive, sloped area around the house foundation,and to clear the basement door for off season storage but I'm concerned that the Honda is underpowered.
The new Simplicity Pro looks nice but there is no dealer close by. I have 2 Ariens dealers within 10 minutes. First was leaning towards 28 Pro because it's most similar to my current Simp but then saw the 28 SHO which appears to be a bargain, even after the cost of adding heated grips.
My main goal is to get a bigger cut, throw further than now and as far as posssible in real world (not paper specs) and get done faster than now. So I'm now thinking 28 SHO with a weight kit to keep the front end down for uphill in the drive where the front end lifts because I have the skids up for gravel. Thinking the throw distance on the 28 SHO with the 14" SHO impeller will be better than my Simp with the 12" impeller.
Not afraid to spend a few $ more for the right machine but the 28 Pro is a lot more and thinking that maybe it's simply overkill.
Appreciate everyone's feedback in advance.