Snowblower Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
6 Posts
Beginning of you post is all good advise, this is unnecessary. We try to help each other here no matter what the skill level.
Couldn’t get the nut off without the whole drain pipe turning….tried all methods here. Ended up flipping the machine into service position removing the pipe and clamping it in a vice to get the nut off. Ridiculous malarkey. Surely must be a better way to design this.
 

·
Registered
Joined
·
6 Posts
all done w oil change. I cannot see that drainzit makes a tube that fits my Ariens engine. Installed tube nice and tight. added Teflon tape to nut. Went to several places for a crush washer...apparently my nut is not designed for one. Manual could be better written. Thanks for help and feedback all.
Hood Automotive tire Light Automotive lighting Motor vehicle
 
1 - 6 of 6 Posts
Top