Hey all,
First of all the engine is a Tecumseh Snow King LH195SP-67514D. I've searched and found that this is a 5.5HP engine. The engine is completely screwed up. I had a repair guy take a look and said it would be better off to replace the engine or buy a new blower.
I have a few questions: (1) Can I swap in a bigger/more powerful motor with minimal work, and if so which engines would be compatible? I know some have said the Harbor Freight Grey Hound 6.5HP was a good, cheap buy; or (2) should I just replace the motor with a new one, same exact model? I know this is the easier path, but I would like more power!
It really comes down to difficulty in the installation of a different engine. I'm quite handy, having done most maintenance on our cars. So I do know a thing or two about tools and such.
Most important thing is the shaft size right? Well here is a what I found:
MTD Style Crankshaft #37842 - 7/8” Dia. x 2-13/16” with Keyway
Thank you ahead of time for any advice!
First of all the engine is a Tecumseh Snow King LH195SP-67514D. I've searched and found that this is a 5.5HP engine. The engine is completely screwed up. I had a repair guy take a look and said it would be better off to replace the engine or buy a new blower.
I have a few questions: (1) Can I swap in a bigger/more powerful motor with minimal work, and if so which engines would be compatible? I know some have said the Harbor Freight Grey Hound 6.5HP was a good, cheap buy; or (2) should I just replace the motor with a new one, same exact model? I know this is the easier path, but I would like more power!
It really comes down to difficulty in the installation of a different engine. I'm quite handy, having done most maintenance on our cars. So I do know a thing or two about tools and such.
Most important thing is the shaft size right? Well here is a what I found:
MTD Style Crankshaft #37842 - 7/8” Dia. x 2-13/16” with Keyway
Thank you ahead of time for any advice!