Snowblower Forum banner

1 - 1 of 1 Posts

864 Posts
Discussion Starter #1
will pay for carb and shipping, prefer complete carb but all I really need is the main body. this is an older HM80 vintage 1972 ? with the long choke lever, carb mounts parallel to engine, i.e. choke bore/throat faces pullstarter side, and throttle plate itself faces output shaft/belt/pulley/chute side. the throttle bore does not face straight out the side like a 6HP or 7HP. this type of carb has the linkage, choke handle, etc. designed accordingly, the governor connects to a separate plate that bolts to the side and goes over the carb.

need at least one, but would buy several to have spares, as I have several of these HM80 powered machines

pm here or email, thanks

1 - 1 of 1 Posts