Craftsman 247.88790 snowblower.
4-way joystick controls the chute left-right and deflector up-down.
Here's the parts diagram:
http://www.searspartsdirect.com/par...quipment-Parts/Model-247887900/0247/1507200/P0712014/00002?blt=06&prst=&shdMod=
There are 2 cables that run from the joystick (36) to the cable guide (48).
The rear one, that raises the chute deflector is frozen. If I can't free it up
I want to replace it, but the parts diagram does not show cables.
How would I find the part if it's not shown on the diagram?
Online Chat with sears was of no help at all.
Is it just a matter of buying generic cable, cut to length and solder on new ends?
Thanks.
4-way joystick controls the chute left-right and deflector up-down.
Here's the parts diagram:
http://www.searspartsdirect.com/par...quipment-Parts/Model-247887900/0247/1507200/P0712014/00002?blt=06&prst=&shdMod=
There are 2 cables that run from the joystick (36) to the cable guide (48).
The rear one, that raises the chute deflector is frozen. If I can't free it up
I want to replace it, but the parts diagram does not show cables.
How would I find the part if it's not shown on the diagram?
Online Chat with sears was of no help at all.
Is it just a matter of buying generic cable, cut to length and solder on new ends?
Thanks.
. They don't show the cables seperately on the diagram because they don't sell them seperatly. I would try to soak your cable in some penetrating grease and free it, otherwise look for a different type of cable that you can use as a substitute. I certainly wouldn't pay for the $$$ their asking for that Control assembly.
