[tabora]

I have a phone endoscope and it's very dark, hard to see and distinguish things

I've played with it a bit. It's quite bright, and adjustable.

Wonder now, who makes it, and who is Nidage.

NIDAGE 1080P Semi-rigid Wireless Endoscope 2.0 MP HD WiFi 5.5MM Borescope Inspection Camera with Cable for Android and IOS Smartphone, iPhone, Samsung, Tablet

The wireless borescope camera equipped with bendable semi-rigid cable with suitable hardness and softness, which can control the inspection camera’ direction, bend and keep it's shape to access a wide variety of confined spaces, such as curved holes or pipes. It can be used for vehicle...

www.nidageo.com

 

[TwiceStroked]

A few handy tools for the garage.

Extra long small flat screw driver, handy for carb adjustments
Extendable magnet
Slotted screw starter
Nut splitter
Right angle flat blade screw driver
Push punch
Thirst quenching tool


View attachment 196312

U 4got a BFH

 

[micah68kj]

I find my Ace/Hansen thread tap and Die set has been a really helpful addition to my meager tool set. I did have a nice tool set; big roll cab and top box full of Mac and Snap On tools. Got them stolen so now I just have some cheap craftsman and kobalt junk.

 

[Stout]

Learned the hard way on cheap shop tools.

drill bits for example. I need HSS bits so I pay for quality. bought a Drill Hog set....was disappointed and told them so ....so they sent me their "Premium" set and was disappointed with them as well.

My Dad gave me some quality HSS bits that work great. Don't know the brand.

If anyone here has a recommendation for great drill bits , let me know.......and not ones that work great for 3-4 times and then get dull ( I do use cutting oil ). I don't need a set. I only need 3-4 specific sizes .
I have had good luck with quality Dewalt bits.

I buy all my drill bits from a local industrial supply house. I find their performance to be far better than any bit found at a big box or hardware store. The type of bit that I buy depends on what I'm drilling - sometimes it's just HSS bits, other times I buy cobalt bits. Their reputation is on the line, so they're not going to sell me some cheap steel bits that are dull after a couple of uses. Therefore, I don't worry about the brand they sell me - whether its Chicago-Latrobe, Cleveland Twist Drill. Morse, etc.

 

[Toon]

Jewelers loop

I use it for fine work, reading information on drill bits and milling cutters, and inspecting traces on circuit boards.
Because it allows both hands free, I also use it to pull slivers out of my fingers.

 

[Toon]

Broken bolt or stud removal tool. It does require a bit of space to use, but if you can get a tight grip on the stud it works great. I have also used it to grab the head of a stripped pan head screw with success.

I have had it for about 2 years now and it is holding up well, although it doesn't get used that often. For less than $20 it has been a good tool.

 

[Chils]

Before you open the spoiler on this one look at it and try to figure out what is. It came with a tool I bought years ago.

Spoiler

This is a rattler. It is for breaking loose rusted bolts and screws, goes on an air hammer. It has 2 snap rings so your wrench doesn't ride off the hex and a 3/8" drive on the end. It had a 5/16" socket on it when I got it. I think they were using it to break loose stubborn brake bleeder screws.

 

[Auger1]

Jewelers loop
View attachment 196702
View attachment 196703
I use it for fine work, reading information on drill bits and milling cutters, and inspecting traces on circuit boards.
Because it allows both hands free, I also use it to pull slivers out of my fingers.

I take those little suckers off of old VHS-C video cameras and use them for close up reading. Best part is they are "free"

 

[Shaw351]

Handee clamp ...... gets you into those hard to reach places

 

[tabora]

Handee clamp ...... gets you into those hard to reach places

Just bought one for $18; Thanks!

 

[Shaw351]

I bought a bunch a few years ago for x-mas gifts for my wrench brothers, was a gift that was well received & nobody had even heard of it.

Just bought one for $18; Thanks!

 

[orangputeh]

Just bought one for $18; Thanks!

what are the key words?
could not find it.

 

[Toon]

A piece of paper towel in a gear wrench or socket will hold a nut or bolt quite well but I like the idea of accessing hard to reach spring clamps.
-

 

[orangputeh]

Not a tool but very valuable.
Those blue shop towels from Costco.
When on sale a great value.....I use one for a couple days. very sturdy.

I used to use those red shop rags but my wife won't wash them anymore for some reason.

 

[tabora]

what are the key words?
could not find it.

Handee Clamp --Garage, Grip, Tool, Mopar, Ford, Chevy, Diesel, Tractor, Aviation | eBay

<p>Handee Clamp -- designed as an extension clamp in tight places your hand can’t reach.</p><br /><p>Designed to hold bolts, clamps or nuts in adjustable jaws. Acts as a vise grip.</p><br /><p>A must have for mechanics </p>

www.ebay.com

 

[Honda1132]

Great thread.

We used Dormer short length split point HSS when I worked trailer wreck rebuild. That's drilling thousands of holes weekly. When I fabbed a trailer wall that is 3000 holes drilled in aluminum, steel, and stainless. They are quality bits.

I remember seeing these around, my dad worked in a truck equipment shop.

 

[orangputeh]

Great thread.


I remember seeing these around, my dad worked in a truck equipment shop.

Sounds like what I need. I can only find sets and sets of 10. I do need quality drill. Got a Drill Hog set that was highly rated but I was highly disappointed.

 

[Chils]

Sounds like what I need. I can only find sets and sets of 10. I do need quality drill. Got a Drill Hog set that was highly rated but I was highly disappointed.

MSCDirect.com

Shop for at MSC Industrial Supply. Same-day shipping available on more than 500,000 products.

www.mscdirect.com

 

[distrbd]

very cool $259 for the set..........

cool tool, I had not seen it before until today, then I wondered how long will it take for China to copy /produce a fake version, so I googled tite reach, sure enough Ali Expres already has it for under $15($20CAD):
2.5C$ 35% OFF|Extension Wrench Automotive Universal DIY Tools Tite Reach Extension Wrenches Screwdriver Adapter Wrench Car Spanner Car Repair|Wrench| - AliExpress

 

[distrbd]

Since we're talking about neat/handy/favorite tools, this automatic 5" center punch made by Rennsteing, is my my most used tool in my hobby shop, it has never missed a punch ,and can really leave a visible dimple on steel:
If you do consider buying one, make sure it's the 5" not the 3/4", the smaller 3/4" did not perform nearly as well so I returned it.

Rennsteig 5" Automatic Adjustable Center Punch, RN430230 - Amazon.com

Rennsteig 5" Automatic Adjustable Center Punch, RN430230 - Amazon.com

www.amazon.com